【Features of the new 3RACING Sakura D5S-V2】
·Concept of develop the D5
·More easy to learn how to play the drift chassis( be sure your first Drift chassis )
·Low Centre of Gravity
·More easy to apply your interior ( as we knew most peoples like decor for their own body)
·Free length of wide possible ( either 190 or 210 more)
·Big angle
·Less maintain
·Sealed differential
·Gear transmissions
·Affordable Care
·If you interesting that chassis pls likes our FB fans page , it is the encouragement to my team !
·Stay safe n healthy brothers!
·Features include
·3.0 ratio gear transmission
·Rear-wheel drive
·Rear motor placed
·Gear Style differential
·Front IFS absorber
·Free length wide @ Front n Rear
·KPI steering
·Most clearances lower arm
·Magnet body most standard
·Double Wipers steering
·All Fibreglass
·Wider front Bumper
·Lift up servo places
·Front n Rear wide 198mm
·Wheel base 260mm
·Full ball bearing
【Basic parameters】
1/10, the wheelbase is adjustable between 258~262MM
Gear transmission, 3.0 internal gear ratio
Gear differential, RR super rear rear drive
Full vehicle bearing, rear wheel CVD drive shaft
Front IFS horizontal shock absorber design, plastic screw thread adjustable shock absorber
Glass fiber bottom plate/second floor plate/battery limit piece/rear hydraulic rack
Inverted double-column steering system, large angle KPI steering
Self-contained magnetic invisible car shell pillar
【Precautions for new installation】
Page 5 [M3 x 6 x 2.5mm Spacer (metal spacer)] between [Front Suspension Arm] and [4.8mm Ball Stud L=5 (ball head)], BAG is recommended Instead of [M3 x 6 x 1.5mm Spacer (plastic spacer)] in 8 (Pack 8), the plastic spacer needs to be cut from the plastic board.
【Combination Introduction】
【Introduction of Electronic Equipment】
【Servo】
（1）GX 312 Short Servo：
Voltage: 6.0-7.4V
Pull force: 12KG
Speed: 6V-0.1s/60° 7.4V-0.09S/60°
Gear: Imported copper steel teeth
（2）GX R15 Short Servo：(metal, all steel teeth)
Voltage: 5V-8.4V
Speed (6.0V): 0.11sec/60°
Speed (7.4V): 0.095sec/60°
Speed (8.4V): 0.085sec/60°
Locked-rotor torque (6.0V): 13kg.cm
Locked-rotor torque (7.4V): 15kg.cm
Locked-rotor torque (8.4V): 16kg.cm
（3）GX G25 Short Servo：(All metal, all steel teeth)
Voltage: 6V-8.4V
Speed (6.0V): 0.08sec/60°
Speed (7.4V): 0.07sec/60°
Speed (8.4V): 0.06 sec/60°
Locked-rotor torque (6.0V): 22kg.cm
Locked-rotor torque (7.4V): 25kg.cm
Locked-rotor torque (8.4V): 27kg.cm
（4）GX X25 Short Servo：(All metal, reinforced steel teeth, brushless Servo)
Speed (6.0V): 0.05sec/60°
Speed (7.4V): 0.045sec/60°
Speed (8.4V): 0.04 sec/60°
Locked-rotor torque (6V): 22kg.cm
Locked-rotor torque (7.4V): 25kg.cm
Locked-rotor torque (8.4V): 28kg.cm
【ESC】
（1）Hobbywing 1060 60A Waterproof Brushed ESC：
（2）Hobbywing QUICRUN-10BL120-SENSORED ESC：
Cont./ Peak Current: 120A / 760A
Output BEC: 6V@3A
Battery: 4-9cells NiMh, 2-3s liPo
Weight: 105g
Item Size: 43*36*33mm
Features:
1.Bulit-in 6V@2A, 6V@3A BEC
2. Compact size, suitable for various car chassis
3. Auto identification system can recognize sensored / sensorless brushless motors automatically
4. Core competition program for excellent control feel & multiple programmable items
5. Multiple protections: Low voltage cut-off protection, Over-heat protection, throttle signal loss protection, Motor Lock-up protection
（2）Hobbywing ET120 Easy Turbo 120A SENSORED ESC：
In response to the over-complexity of Turbo ESCs on the market, XRC and Hobbywing Technology launched this 120A brushless ESC with built-in Turbo program but is easier to use.
The ESC is mainly designed for 1/10 drift/racing/buggy
feature of product:
1. The ESC has a built-in intelligent and easy-to-use Turbo program, no need to flash Turbo firmware
2. The Turbo function abandons the traditional and complicated redundant setting options, and only retains the core 3 necessary options, and all other options are changed to program AI automatic intelligence.
3. The parameters can be set directly through the ESC setting button or simple setting card, making the product simpler, more intelligent, and easier to use
Core 3 Turbo options:
1. Boost timing: 0~32 degrees adjustable, 4 degrees stepping (0/4/8/12/16/20/24/28/32 degrees)
2. Turbo timing: 0~32 degrees adjustable, 4 degrees stepping (0/4/8/12/16/20/24/28/32 degrees)
3. Turbo opening delay: 0~1 second adjustable (0/0.1/0.2/0.3/0.4/0.5/0.6/0.8/1.0 second)
This product has already welded the 5 wires of the ESC as shown in the picture. You need to weld the positive and negative wires to the battery plug (not included), and the ABC wire to the motor or the matching plug of the motor.
（3）Surpass Rocket TS160-V2 Pro 160A SENSORED ESC：
Features:
【Motor】
（1）SNOW PANTHER 540 Brushed Motor：
4 Pole 12 Slot Hi-torque Motor Design
CNC Machined 6061 T6 Billet Aluminum Heatsink Can
High Purity Copper Windings Maximizes Efficiency
High RPM Oversized Bearings
Precision balanced rotor,smoothness for best reliability and maximum RPM
Removable/Replaceable Rotor
Precision Engineered for Maximum Energy Conversion
Rebuildable with an easily accessible commutator and replaceable brushes and springs
High strength magnets for unmatched brush-motor performance
Specifically designed for R/C vehicles that require precise movement control
Excellent torque and long-run times
Direct-Solder Wiring Tabs for flexible soldering options
Dual-ball Bearings Design
（2）Hobbywing QUICRUN 3650 G2 10.5T Sensored：
Features
（3）Hobbywing XeRun Justock 3650SD G2 17.5T Sensored：
The built-in Hall sensor non-adjustable adjustable end bell combined with a high precision and balanced rotor guarantees the user a smooth and linear power on demand.
The silicon O-ring seal fitted between the end bell and stator helps to conduct inner heat to the motor case and prevent dust from entering the HALL sensor.
Customized 3.5mm low impedance bullet connectors soldered to the motor wires guarantee “plug-and-play” and stable connections between the ESC and motor.
The end bell is easy to be removed for maintenance purposes and for the replacement of common wearing parts such as rotor and sensor module (Ex bearings).
This motor is perfectly matched with the XR10-Justock ESC for all zero timing spec racing and also compatible with other Hobbywing ESCs including other brands and is used in various 1/10th, 1/12th scale on-road & off vehicles. It is an ideal choice for beginners or for the racers looking for a practice motor.
（4）Surpass Rocket 540 V4S 10.5T Brushless Motor Sensored：
SURPASSHOBBY ROCKET 540 V4S brushless pole-speed motor meets the requirements of ROAR (USA) competition and IFMAR rules. It provides MODIFIED 3.5-9.5T for all kinds of T numbers. It is suitable for F1, 1/12, 1/10 off-road, drift and electric car races. CNC6061 aluminum alloy shell, induction line interface, aluminum tail cover; ultra-low internal resistance, improve motor performance and reduce motor operating temperature, optimize heat dissipation efficiency, disassembly and adjustable timing.
[WFLY X4]
Features:
●Memory storage for 40 models
Each model can be set independent name
You can simply set parameters of models that only has few differences by MODEL COPY function.
●Large car brake mixing
Brake mixing of the front and rear wheels of 1/5GP and other large cars can be adjusted independently.
●Anti-lock brake systems(A.B.S)
Prevent the car from slipping when crossing a curve or braking.
●Throttle acceleration
Engine acceleration or brake will produce delay before the arriving of action command. This function can help limit the delay time to a minimum range.
●Steering speed
Adjust the steering wheel speed with flexible way.
●Throttle speed
When the throttle suddenly strongly operate on the wet road,the wheels may slip and it can’t successfully complete the acceleration motion. This function can simply solve the problem and help complete the acceleration motion and prevent the wheel from slipping.
●Timer
You can choose timing/countdown timing or lap timing.
Lamp timing can record a single lap time or total time for 100 groups.
●Trim/Switch function select
The function can assign different functions to each trim or switch.
