Switch Between Setting of Models On the Running(ID SEED)
RC6GS V2 6 Channels RC car controller with good performance will enhance your driving experience
Setting simplicity, fast response for 6 channels, Model’s voltage Real-time Telemetry,Cruise Control,Dual Mix Steering Control,USB upgrade firmware,Throttle Lock, Voltage Protection, ABS and fail-safe protection, 10 Subsidiary ID, outstanding long range up to 600 meters and more features. (actual control distance is according the local environment).
RC6GS V2 is an ideal partner for all types RC cars and boats in the market including single-engine and twin-engine models such as Crawlers, Tanks, Caterpillars, Basher, RC Short-Course Truck, RC Crawler, Drifting RC Car, Gasoline RC Car, Mini RC Car, RC Monster Truck, Off-Road RC Car and other types of RC cars or boats.
We add strap hook, hole for FPV monitor, improve the handle shape, change the switches position to enhance using experience.
RC6GS V2 RC Remote Control Transmitter Features:
1.【Excellent Anti-interference】: Real pseudo random algorithm FHSS communication technology makes RC6GS V2 control distance up to 1900 feet (600meters), and over 20 units of RC6GS V2 can work simultaneously at one place without any interference.
2.【Up to 600m Ground Distance】: The control distance is up to 600 meters under the superior anti-interference ability.
3.【Built in Gyro】: R7FG built-in gyro can keep the vehicle runs in a straight line, and Gyro sensitivity can be adjusted by transmitter, which fits for drifting and on-road cars.
4.【Two-way Transmission Return】: Real-time signal strength, RX battery voltage EXT (Model battery voltage) can be dispalyed on the RC6GS V2 screen. (Only support works with R7FG or R8F)
5. 【Customized Channels】: CH3-CH6 can be customized to VR, three-way switch and tact switch, the tact switch can be used for cruise control mode, a good idea for crawler, all channels’ fail-safe values can be set to any value as you need.
6. 【Dual Programmable Mix Control】: Mix control can be programmed with any two channels and each channel can be customized. That’s friendly for twin-engine vehicles, such as tanks, boats, 4 wheel steering car.
7. 【Adapts to Most of Types Vehicles】: with 10 models storage and each model can be set up and named separately. It is suitable for RC rock crawler, monster truck, Baja, off-road RC car, etc.
8. 【Superb Ergonomics】: The handle shape is more linear and handy with the ergonomic design. The strips on the trigger increase the touching friction. Added Hook, FPV monitor holder hole, middle of the handle SWD switch, user can personalize by changing SWA to SWD.
9.【Reverse Polarity Protection】: Anti-polarity connect protection technology to keep your transmitter safety even if you Accidentally connect the wrong positive and negative poles. JST connector supports multiple batteries: liPo or 6*AA.(NOT INCLUDED)
RC6GS V2 Transmitter Specifications:
- Channels: 6
- Control Distance: Up to 600 meters
- Model: RC Cars and Boats
- Low Voltage Alert: Yes(Below 4.6V)
- Operating Voltage: 4.8-15.0V DC
- Operating Current: 80mAh-120mAh
- Screen: 128*64 resolution, LCD back light
- Spread Spectrum: FHSS
- Antenna Length: 106mm
- Frequency: 2.4GHz ISM band (2400MHz-2483.5MHz)
- Battery compartments: 25*97*60mm (JST 2Pin connector)
- Size: 22.4*17.5*11.6cm
- Weight: 323g
- Compatible Receivers: Radiolink R7FG/R6FG/R6F/R4FGM/R4F/R8EF/R8F
R7FG Receiver Specifications:
- Channels: 7
- Gyro inside: Yes
- Control Distance: Over than 600 meers
- Signal output: PPM/PWM/S-BUS, 2.4GHz
- Receiver operating voltage: 4-10V
- Modulation Mode: GFSK
- Antenna Length: 200mm
- RF Power: <10dbm
- Channel resolution: 4096
- Working Current: 30mA
- Applicable model: car, boat
- Size: 3.5*1.8*1.5cm
- Weight: 6g
Real-time Information Transmission
The telemetry feature can give you real-time information for reference, like vehicle’s battery voltage, RSSI, transmitters receiver’s battery voltage and more. Max Telemetry Voltage up to 6S. To support telemetry function, the RC6GS V2 needs upgrade V6.0.0, vehicle must be equipped with R7FG receiver.
Cruise Control System
One switch to control the throttle value, you just need to focus on steering when the car downhill or kids trainning, handy for user.
FPV Head Track Function
Used with FPV goggles to control the up, down, left, and right movement of the camera on the model car.
*To support head track function, the RC6GS v2 needs upgrade V6.3.2, default channel 5 &6 for this function
*Goggles and cable NOT include.
Gyro Inside the Receiver
The integrated gyro in receiver will help you automatically correct the servo directions, which works well for on/off road vehicle’s model.
Dual Programmable Mix Control
Any two channels can be programmed and each channel can be customized. That’s friendly for twin-engine vehicles, such as tanks, boats, 4 wheel steering car.
Low Voltage Alarm
The transmitter support customize the voltage value of the transmitter, receiver, vehicle battery, and RSSI. When your boat is far away from your vision, you can adjust your route in time according to these date.
Low Voltage Alarm Page Show:
4 Working Modes Quick to Bind with Radio
-PWM+PPM/PWM+SBUS(without Gyro) Tips: the Bind Button is tiny, we suggest use a needle or sharp tool to
-PWM+PPM/PWM+SBUS(with Gyro work and one LED status is Red) press the Black Part on the Bind Button.
Mini Size for RC Drift Hot wheels
Note
* All RadioLink transmitters are not open sourced and can only bind to receivers developed by RadioLink. Vice versa.
Package List:
1.RC6GS V2 with R7FG:
- Radiolink RC6GS V2 transmitter x 1
- Radiolink R7FG Receiver x 1
- Telemetry Cable x 1
- User Manual x 1
- Neck Strap x 1
2.RC6GS V2 with R6FG:
- Radiolink RC6GS V2 transmitter x 1
- Radiolink R6FG Receiver x 1
- User Manual x 1
- Neck Strap x 1
3.RC6GS V2 R7FG R6FG:
- Radiolink RC6GS V2 transmitter x 1
- Radiolink R7FG Receiver x 1
- R7FG Telemetry Cable x 1
- Radiolink R6FG Receiver x 1
- User Manual x 1
- Neck Strap x 1
4.RC6GS V2 R7FG Holder:
- Radiolink RC6GS V2 transmitter x 1
- Radiolink R7FG Receiver x 1
- Telemetry Cable x 1
- User Manual x 1
- Neck Strap x 1
- FPV Holder x 1
5.RC6GS V2 with R4FGM:
- Radiolink RC6GS V2 transmitter x 1
- Radiolink R4FGM Receiver x 1
- User Manual x 1
- Neck Strap x 1